Everything About How to Remove Pedal Commander

So you've been using the Pedal Commander and having fun with the increased throttle responsiveness. However, after experiencing some extra vigor Pedal Commander provides, you may wish to revert to the original settings. You might be selling your automobile, restoring it to its original configuration for warranty claims, taking it to the dealership for inspections, or simply wondering about the procedure. Whatever the cause, deleting your Pedal Commander is simple! Let's get in and get it done together!

Step-by-Step Process for Removing Your Pedal Commander

Gather Your Tools

You will just need your hands and patience. Here's everything you'll need:

Your car keys (obviously!)

A flashlight (if you’re working in a dimly lit area)

Power Off Your Vehicle

Safety first! Make sure your automobile is switched off. Remove the key from the ignition and wait a few minutes to ensure all systems are turned off. This eliminates most electrical problems and the possibility of sensors tripping accidentally.

Locate the Pedal Commander

Pedal Commander is permanently mounted to the throttle pedal assembly. Slide your seat back to make extra room, then glance under the dashboard. The Pedal Commander unit's connections are connected to the pedal wire harness.

Disconnect the Pedal Commander

Unplug the Pedal Commander from its throttle pedal connection. This is where the Pedal Commander plug connects to the throttle pedal wire. The connection is normally released by pressing a tab or clip. Press the tab or clip firmly yet gently. If it feels stuck, don't force it. A little wiggle can sometimes be sufficient to separate it.

Remove the Pedal Commander Unit

After unbolting the connection, carefully remove the Pedal Commander unit from the pedal assembly. Remove any extra zip ties or glue that hold it in place. That's it, plain and simple. Take your time here since you must remove all adhesives and zip ties without damaging the surrounding cables, connections, and car interiors. If you encounter any resistance, double-check to ensure all clips and ties are released.

Reconnect the Stock Plug

Locate the original connector from your car's electrical harness. This should be near your throttle pedal, where the Pedal Commander is placed.

Reconnect the stock connector to the throttle pedal. It should click solidly into place, and there should be a little "click" confirming a secure connection. You've done an excellent job, and your automobile is ready for whatever comes next.

Make sure it is completely seated. You don't want a loose connection to cause issues later. Give it a small tug to ensure that it is locked.

Double-Check Everything

Before giving yourself a well-deserved pat on the back, take one last look at everything: 

Check that the factory connection locks.

Ensure that no wires are pinched or out of place. 

All removed zip ties and adhesives should be properly disposed of.

Take a minute or so more to investigate the surrounding area. It's always better to find out now than later. Knowing everything is clean and safe might put you at peace.

Test Your Vehicle

Now, it's time to ensure that everything is running well. Start your car and tap the accelerator a few times to be sure it reacts properly. If everything feels OK, congratulations: you have successfully uninstalled your Pedal Commander.

So, while it may have been difficult to remove your Pedal Commander for a moment, as you can see, it's actually rather simple. You now know how to remove it swiftly and safely, whether you're preparing your car for sale, taking it in for servicing, or simply returning it to stock for a short time.

Keep your Pedal Commander in a secure location to remember. You never know when you'll want to reinstall it and enjoy its wonderful performance again.

Elevate Your Driving Experience with Pedal Commander

Good job prepping your car! You've improved its performance and are ready for what's next.

Pedal Commander makes driving more responsive and enjoyable while letting you maximize your car's capability. Whether you're driving in city traffic, merging into freeways, or meandering country roads, Pedal Commander unlocks your vehicle's potential by eliminating throttle lag from your accelerator pedal.

You'll feel different driving with personalization. Pedal Commander's simple settings let you customize throttle responsiveness. This puts you in control by letting you select between Eco Mode for city fuel efficiency, Sport+ Mode for exhilarating thrills, and anything in between.

Enjoy every moment behind the wheel. Pedal Commander will let you feel liberated with adrenaline and a driving thrill.